Kodak EasyShare LS743 manual Camera ready light status, Status Cause

Troubleshooting

Camera ready light status

Ready light

Status	Cause
Ready light glows	Shutter button is pressed halfway down. Focus and exposure
steady green.	are set.
Ready light blinks	Picture is being processed and saved to the camera.
green.
	Pictures are being transferred to computer; camera is
	connected.
	Camera firmware upgrade is in process.
Ready light glows	Camera is in Favorites mode.
steady orange.
Ready light blinks	Flash is not charged. Wait. Resume picture taking when the
orange.	light stops blinking and turns off.
	Auto exposure or auto focus are not locked. Release the
	Shutter button and recompose the picture.
Ready light glows	Camera’s internal memory or card is full.
steady red.	Transfer pictures to the computer (page 36), delete pictures
	from the camera (page 24), switch storage locations
	(page 19), or insert a card with available memory (page 7).
	Camera processing memory is full. Wait. Resume picture
	taking when the light turns green.
	Card is read-only. Change storage location to internal memory
	(page 19), or use a different card.
	Memory card speed is slow. Card cannot be used to take
	videos.
	Change storage location to internal memory (page 19). Use
	this card to take pictures only.
Ready light blinks red	Battery is low or exhausted. Recharge the battery (page 2).
and camera turns off.

41