Kodak EasyShare LS743 manual Setting the date and time, Setting the date & time, first time

Getting started

Setting the date and time

Setting the date & time, first time

The Date and Time have been reset message appears the first time you turn on the camera or if the battery is removed for an extended period of time.

1SET DATE & TIME is highlighted. Press the OK button. (Select Cancel to set the date and time at a later time.)

2Go to step 4 below, Setting the date & time, anytime.

Setting the date & time, anytime

1Turn on the camera. Press the Menu button.

2Press to highlight Setup Menu, then press the OK button.

3Press to highlight Date & Time, then press the OK button.

4Press to adjust the date and time. Press to advance to the next setting.

5When finished, press the OK button.

6Press the Menu button to exit the menu.

NOTE: Depending on your computer operating system, Kodak EasyShare software may let your computer update the camera clock when you connect the camera. See the EasyShare software Help for details.

5