Settings – Attached Devices

Table of Contents sections 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

10..2 KVM switches

Configuring KVM switches is relevant when there are analog KVM switches connected to IP devices in the system. You must select all the KVM switch types physically connected.

To select the KVM switch types:

1.From the “Attached Devices” menu, select “KVM Switches”.

A list of KVM switches appears; the columns show the following:

Model – KVM switch model

Manufacturer – KVM switch manufacturer

Ports – the number of server ports

Matrix – The number of simultaneous users this switch supports.

Note! If you know a KVM switch has matrix capabilities, but no number appears in the “Matrix” column, contact the Belkin Support team to obtain the updated SDF of the KVM switch. Uploading the SDF is explained in the next section.

Figure 65 KVM Switches

2.From the list, select the KVM switch brands and models physically connected to your IP devices.

3.Press . The selection is saved.

OmniView IP 5000 HQ

52

Page 56
Image 56
Belkin 5000HQ user manual Settings Attached Devices, KVM switches