Belkin 5000HQ user manual Pre-Installation Guidelines, Pointer tab

Pre-Installation Guidelines

Table of Contents sections 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Prepare a list of all OmniView IP 5000HQ system components. You will need this information to configure the system.

Appendix A (a separate file on this CD) contains three lists of the details you need to prepare for Belkin OmniView KVM-over-IP devices, power distribution units (PDUs), and Serial Console Servers. Photocopy or print out Appendix A. For other Access Services, see the “Access Services details” section on the next page.

The lists should include the IP device name and MAC address, KVM switch, and the target details.

For each target, list:

•A unique and clearly identifiable name

•The operating system

•Non-default mouse settings. Default mouse settings do not need to be listed.

Note! For Windows® XP, 2003 Server, Vista®, and 2008 Server

For Windows XP, 2003 Server, Vista, and 2008 Server, deactivate “Enhanced pointer precision”. To do so:

From the “Control Panel” select “Printers and Other Hardware”. Click the “Mouse” icon. The “Mouse Properties” box appears. See Figure 2. Select the “Pointer Options” tab.

Figure 2 Pointer tab

The “Motion” section slider bar must be in the center, and the “Enhanced pointer precision” check box must be unchecked. Click “OK” to save changes.

OmniView IP 5000 HQ 3