Configuring Access Services – Introduction
Table of Contents | sections 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 10 11 12 13 14 15 16 17 18 | 19 | 20 21 |
Description – Description of the access service: SSH
Application – PuTTy.exe is the application used for SSH access. The PuTTy application can be obtained from: http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
PuTTy Application Path – PuTTy application must be installed on all client computers, preferably in the same path. In the default path %ProgramFiles%\PuTTy (see Figure 74), the application could be in any drive in the Program Files\PuTTy folder. See the general notes above about variables.
URL/Host – Type the URL/host of the SSH resource.
Port – The SSH port number is 22 (default).
Login Method:
•Prompt for Credentials – This means the SSH login page appears and you log in manually.
•Use OmniView IP HQ Credentials – This means OmniView IP
5000HQ logs in to SSH with the currently logged user credentials. Ensure that SSH is configured to recognize the same user name and password.
•Use the Following Credentials – Where the user name and password are different for OmniView IP 5000HQ and SSH, select this option. User name and password fields appear. Type the SSH user name and password. OmniView IP 5000HQ logs in to SSH using this user name and password.
11..1..7 VNC
Note! OmniView IP 5000HQ currently supports RealVNC free edition and other free VNC compilations (TightVNC and UltraVNC).
Click “VNC”. The following are the default settings for VNC.
Figure 75 VNC – VNC Client mode
OmniView IP 5000 HQ | 61 |
