Configuring Access Services – Introduction
Table of Contents | sections 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 10 11 12 13 14 15 16 17 18 | 19 | 20 21 |
Description – Description of the Access Service - ILO URL/Host – Type the URL/host of the ILO resource.
Port/Application/PuTTy Application Path – These fields are only relevant in SSH mode. The difference between SSH and Web mode is detailed below.
SSH mode (default)
SSH mode uses an ILO console server. In SSH mode, the PuTTy application must be installed on all client computers, preferably in the same path. In the default path %ProgramFiles%\PuTTy (see Figure 70), the application could be in any drive in the Program Files\PuTTy folder. See the general notes above about variables.
The PuTTy application can be obtained from: http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
In SSH mode, the port number is 22 (default).
Web mode
Web mode uses a remote console with power management options. In Web mode, there is no need for an executable application. Figure 71 illustrates the ILO fields in Web mode.
Figure 71 ILO – Web mode
OmniView IP 5000 HQ | 58 |
