Manuals / Brands / Computer Equipment / Projector / Kodak / Computer Equipment / Projector

Kodak Replacing the LAMP MODULE RECEPTACLE, Installing the LAMP MODULE RECEPTACLE

Models: A AM AMT ATS B BR E E-PLUS SLIDE J-E PLUS JA JAMT KKA KKE PLUS

1 54

Download 54 pages, 1.23 Mb

Replacements and Installations

SM4530-1 – 30APR96 11

Replacing the LAMP MODULE RECEPTACLE

Warning

Dangerous Voltage

[1] Disconnect the main power.

[2] Do the replacement procedure for the LOWER HOUSING ASSEMBLY.

[3] Cut and remove the necessary WIRE TIES.

[4] Remove the 2

Torx

SCREWS on the left side of the LOWER LIGHT BAFFLE ASSEMBLY.

[5] Loosen the

Torx

SCREW on the right side of the LOWER LIGHT BAFFLE ASSEMBLY approximately 1/2 way.

[6] Lift and remove the LOWER LIGHT BAFFLE ASSEMBLY.

[7] Lift the GRILLE ASSEMBLY up.

[8] Remove the 2 long

Torx

from the BLOWER COVER ASSEMBLY.

[9] Lift the BLOWER COVER ASSEMBLY up.

[10] Lift and move the PREHEAT DUCT up.

[11] Toremove the LAMP MODULE RECEPTACLEfrom the PREHEAT DUCT,compress the 2 TABSon the LAMP

MODULE RECEPTACLE.

Installing the LAMP MODULE RECEPTACLE

Warning

Dangerous Voltage

[1] Disconnect the main power.

[2] Do the replacement procedure for the LAMP MODULE RECEPTACLE in reverse order.

A100_0016HA SCREW (not shown)

RECEPTACLE

LAMP MODULE

ASSEMBLY

BLOWER COVER

SCREW (2)

PRE-HEAT DUCT

SCREW (2)

LOWER LIGHT BAFFLE

A100_0016HCA

Contents

Main Kodak Ektagraphic Table of Contents Page Section 1: Replacements and Installations Replacing the LOWER HOUSING ASSEMBLY Phillips SCREWS for Painted Models) from the LOWER HOUSING ASSEMBLY. Installing the LOWER HOUSING ASSEMBLY Replacing the FAN SHAFT ASSEMBLY Torx SCREW from the BLOWER COVER ASSEMBLY. Page Installing the FAN SHAFT ASSEMBLY Replacing the MOTOR Installing the MOTOR Replacing the WORM PULLEY and MECHANISM BELT Installing the WORM PULLEY and MECHANISM BELT Replacing the THERMAL FUSE ASSEMBLY Installing the THERMAL FUSE ASSEMBLY Replacing the LAMP MODULE RECEPTACLE Installing the LAMP MODULE RECEPTACLE Replacing the CYCLE SOLENOID ASSEMBLY Installing the CYCLE SOLENOID ASSEMBLY Replacing the MECHANISM ASSEMBLY Installing the MECHANISM ASSEMBLY Replacing the AUTO-FOCUS BRACKET ASSEMBLY Phillips Installing the AUTO-FOCUS BRACKET ASSEMBLY Replacing the CAM STACK ASSEMBLY and CYCLE LEVER ASSEMBLY Page Installing the CAM STACK ASSEMBLY and CYCLE LEVER ASSEMBLY Replacing the LAMP SOCKET TERMINAL ASSEMBLY, N.P. Installing the LAMP SOCKET TERMINAL ASSEMBLY Replacing the LAMP SOCKET TERMINAL ASSEMBLY, Painted Models Installing the LAMP SOCKET TERMINAL ASSEMBLY, Painted Models Replacing the LENS MOUNT ASSEMBLY - Auto Focus Model Installing the LENS MOUNT ASSEMBLY - Auto Focus Models Replacing the LENS MOUNT ASSEMBLY - Non Auto Focus Model Installing the LENS MOUNT ASSEMBLY - Non Auto Focus Model Replacing the AUTO-FOCUS SWITCH ASSEMBLY Installing the AUTO-FOCUS SWITCH ASSEMBLY Replacing the FOCUS SHAFT ASSEMBLY - Auto Focus Models Installing the FOCUS SHAFT ASSEMBLY Replacing the FOCUS SHAFT ASSEMBLY - Non Auto-Focus Models Page Section 2: Adjustments Adjusting the CYCLE SOLENOID Adjusting the INDEXER LEVER ASSEMBLY Adjusting the SLIDE LIFT LEVER MANUAL Adjusting the SLIDE LIFT LEVER POWER Adjusting the ZERO POSITION SWITCH Adjusting the Focus Light Path - Auto Focus Models Adjusting the NULL Adjusting the PHOTOCELL Wratten Page Adjusting the CLAMP PAD ASSEMBLY Adjusting the DARK SHUTTER Section 3: Lubrication Page Page Section 4: Tools Section 5: Specifications Page Section 6: Diagnostics MAIN MOTOR Voltages 9-PIN SPECIAL APPLICATION PLUG PHOTOCELL Voltages 5-PIN REMOTE CORD PLUG Voltages KODAK EC-3 REMOTE CONTROL SMALL COMPONENT BOARD ASSEMBLY 256809 Voltages Voltage Specications - General Parts Power, Illumination, and Cooling Malfunctions Slide Transport Malfunctions Page Page Focus Malfunctions