Troubleshooting

Status

Solution

Picture is too dark

Reposition the camera for more available light.

 

Use Fill flash (see page 17) or change your position so light is not

 

behind the subject.

 

Move so that the distance between you and the subject is within the

 

effective flash range. (See Specifications, starting on page 56.)

 

To automatically set exposure and focus, press the Shutter button

 

halfway. When the framing marks turn green, press the Shutter

 

button completely down to take the picture.

 

In Program mode, adjust the Exposure Compensation (see page 21).

Picture is too light

Reposition the camera to reduce the amount of available light.

 

Turn the flash off (see page 17).

 

Move so that the distance between you and the subject is within the

 

effective flash range. (See Specifications, starting on page 56.)

 

To automatically set exposure and focus, press the Shutter button

 

halfway. When the framing marks turn green, press the Shutter

 

button completely down to take the picture.

 

In Program mode, adjust the Exposure Compensation (see page 21).

Pictures that have

If PERFECT TOUCH Technology has been applied to a picture on the

KODAK PERFECT

camera, do not apply it again when the picture is on the computer

TOUCH Technology

(or on a KODAK Picture Kiosk).

NOTE: PERFECT TOUCH Technology is automatically applied to Pictures

applied (twice) are

of lower image

taken in Smart Capture mode.

quality.

 

Direct printing (PICTBRIDGE enabled printer) problems

 

 

Status

Solution

Cannot find the

Use the Direct printing menu to change the image storage location.

desired picture

 

The Direct printing Press any camera button to redisplay the menu. menu interface turns

off

www.kodak.com/go/support

54

Page 63
Image 63
Kodak M5370 manual Taken in Smart Capture mode, Direct printing Pictbridge enabled printer problems