Kodak SD-63HK owner manual Dynamic Range Control DRC, Line1 Select, or ENTER

Dynamic Range Control (DRC) Line1 Select

DRC (Dynamic Range Control) enables you to control the dynamic range so as to achieve a suitable sound for your equipment.

Press SETUP in the stop mode.

1 Press b or ato select “Audio”, then press 5 or ENTER.

If you connect an another unit (DVD, VCR or etc.) to the LINE IN1 sockets, you must select the type of audio input.

Press SETUP in the stop mode.

1 Press b or a to select “Audio”, then press

5or ENTER.

2 Press 4 or 5 to select “DRC”.

Language	Picture	Audio	Parental
DRC
	Std
Line1 Select	Coaxial

BACD/Enter/Setup/Return

2 Press 4 or 5 to select “Line1 Select”.

Language Picture Audio Parental

DRC	Std
Line1 Select	Coaxial

BACD/Enter/Setup/Return

	Press a or ENTER, then press 4 or 5 to
3 select your desired sound type.
	Language	Picture Audio	Parental
	DRC	Std	Max
	Line1 Select	Coaxial	Std
			Min
	BACD/Enter/Setup/Return
Max: Full dynamic range is increased.
Std: Full dynamic range is maintained.
Min: Dynamic range is reduced.
4	Press ENTER.
	The selected sound type remains.

5 Press SETUP or RETURN to close the screen.

3 Press a or ENTER, then press 4 or 5 to select the appropriate type of audio input.

Language Picture Audio Parental

DRC	Std	Optical
Line1 Select	Coaxial	Coaxial
		Analog

BACD/Enter/Setup/Return

Press ENTER.

4 The selected appropriate type remains.

5 Press SETUP or RETURN to close the screen.

Notes:

•This function works only during playback of Dolby Digital recorded discs.

•The level of Dynamic Range Reduction may differ depending on DVD video disc.

22

2D20401A P16-23 22 26/9/03, 6:02 PM