Kodak SD-63HK owner manual Listening to the radio, Reception of RDS Radio Data System stations

Listening to the radio

Preset the radio stations first as described on page 36.

1 Press DVD/FM/AM to select FM or AM.

Press PRESET + or – to select the desired

2 position number.

You can also select the desired position num- ber using the number buttons (0–9), then press

ENTER.

•For example, to select the preset position number 7, press 0 and 7, then press ENTER. To select the preset position number 25, press 2 and 5, then press ENTER.

3 Adjust the volume by rotating Volume knob on the front panel or VOL +/–on the remote con- trol.

Reception of RDS (Radio Data System) stations

RDS (Radio Data System) is a system gradually being introduced on FM in many countries, where by an inau- dible stream of data is transmitted in addition to the nor- mal radio signal. This data contains various information including station/transmitter identification, traffic informa- tion and a list of alternative frequencies for the radio sta- tion being received.

1 Press DVD/FM/AM select FM.

Select a desired station by pressing the PRE-

2 SET + or –. When the RDS transmission is re- ceived, the RDS indicator and the programme service name (PS) appear on the display win- dow.

Notes:

•RDS is only available for FM reception.

•The PS (PROGRAM SERVICE) NAME is displayed auto- matically when a RDS station is received.

37

2D20401A P32-BACK 37 26/9/03, 6:03 PM