Kodak V600 Zoom manual Setting Up the Image Source

V600UserGuide.book Page 14 Tuesday, March 21, 2000 8:26 AM

KODAK V600 Digital Projector and KODAK V600 Zoom Digital Projector

Setting Up the Image Source

The features that are available on the Setup tab depend on the type of image source that you are using.

Computer Source

Video Source

1.Press Menu and use the Adjust + - buttons to go to the Setup tab.

2.Use the Next button to select a feature.

3.Use the Adjust + - buttons to select an option for the selected feature.

If you wish to return to the factory default settings, use Next to highlight Reset and press Enter.

Source options are computer, video and S-video. When you change sources, a source status message appears indicating if the projector is receiving a signal from that source.

Signal is received:

No signal:

14