Kodak XBS444 warranty Connections, Connecting Antenna/Cable TV to DVD+Hi-Fi VCR

Connections

ips

Depending on your TV and other equipment you wish to connect, there are various ways to connect the DVD+Hi-Fi VCR. Use connections described on pages 11-13.

Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.

Caution

Make sure the DVD+Hi-Fi VCR is connected directly to the TV. Tune the TV to the correct video input channel.

Do not connect your DVD+Hi-Fi VCR via your VCR. The DVD image could be distorted by the copy protection sys- tem.

Connecting Antenna/Cable TV to DVD+Hi-Fi VCR

1 TV.Disconnect the antenna leads from the rear of the

2a round cable as illustrated, it is a 75 ohm coaxial antenna cable. This cable will connect directly to

the jack marked ANTENNA/CABLE IN on your DVD+Hi-Fi VCR.Identify the type of cable from your antenna. If it is

ip

If your antenna lead wire is a flat type antenna cable, connect it to an Antenna Adapter (300-ohm to 75-ohm) (not supplied) and slip the Adapter onto the ANTENNA/ CABLE IN jack. The Adapter does not screw on to the DVD+Hi-Fi VCR, it just slips over the jack.

Antenna Antenna

Cable TV

Wall Jack

Flat Wire
(300 ohm)
300/75 ohm	OR	OR
Adapter
(Not supplied)

FRONT	REAR	CENTER	REAR	FRONT	SUB
					WOOFER
(R 4 )	(R 4 )	( 4 )	(L 4 )	(L 4 )	( 8 )
AM						S-VIDEO OUT		MONITOR	COMPONENT
							VIDEO 1
								OUT	VIDEO OUT
GND							VIDEO		Y
		SPEAKERS							Pb
FM							L
							AUDIO
ANTENNA									Pr
					IN	OUT	R

ANTENNA/CABLE

Rear of DVD+Hi-Fi VCR

ote

During DVD or VCR playback, THE DVD+Hi-Fi VCR is designed so that sound will be heard only from the unit’s 5 speakers and subwoofer, (no sound output is provided to the TV if it is connected to the S-VIDEO OUT or MONITOR OUT on the unit with a optional cables.

Without Cable Box

If your cable wire is connected to your TV without a converter or descrambler box, unscrew the wire from your TV and attach it to the ANTENNA/CABLE IN jack on the DVD+Hi-Fi VCR. Use the supplied round coaxial cable to connect between the DVD+Hi-Fi VCR’s ANTENNA/CABLE OUT jack and the 75 ohm antenna input jack on the TV. With this connection, you can receive all midband, super band, and hyperband channels.

With Cable Box

If a converter is required in your cable system, follow the instruction below:

The cable hookup permits both TV and DVD+Hi-Fi VCR opera- tion.

To view or record CATV channel

1Tune the TV to the DVD+Hi-Fi VCR output channel (CH 3 or 4).

2Set the DVD+Hi-Fi VCR channel selector to the output chan- nel of the Cable Converter box by using the CH/TRK (v/V) of your DVD+Hi-Fi VCR. (Example: CH3)

3Select the channel to view at the Cable Converter Box.

otes

With this connection, you CANNOT record one program while viewing another.

If you are using a cable box to tune channels, it is not nec- essary to do Auto Channel Programming as indicated on page 17.

Cable TV

Wall Jack

Back Panel of

Typical Cable Box

FRONT	REAR	CENTER	REAR	FRONT	SUB
(R 4 )	(R 4 )	( 4 )	(L 4 )	(L 4 )	WOOFER
					( 8 )
AM					S-VIDEO OUT	MONITOR	COMPONENT
					VIDEO 1
						OUT	VIDEO OUT
GND					VIDEO		Y
		SPEAKERS
FM					L		Pb

AUDIO

ANTENNA

IN OUT R Pr

ANTENNA/CABLE

Rear of DVD+Hi-Fi VCR

SYSTEM SETUP

11