SYSTEM SETUP
17
VCR Operation Setup (Continued)
VCR Setup Menu Options
11
Press MENU and the MAIN menu will appear.
22
Use vv/VVto select the SETUP menu, then press
MEMORY/ENTER.
The SETUP menu will appear.
33
Use vv/VVto choose a desired option on the
SETUP menu. Then use bb/BBto choose a
desired setting.
FUNCTION OSD
The on-screen display of this DVD+Hi-Fi VCR can be turned on or
off.
FUNCTION OSD: Choose ON and OFF with b/B.
LANGUAGE SELECT
The on-screen programming of this DVD+Hi-Fi VCR can be
displayed in either English, Spanish, or French.
LANGUAGE SELECT: Choose ENGLISH, SPANISH, or
FRENCH with b/B.
AUDIO MODE
The DVD+Hi-Fi VCR has two separate audio playback sys-
tems, the high quality VHS Hi-Fi system and standard NOR-
MALmono system. The same audio is generally recorded on
both systems. The VHS Hi-Fi system plays on separate (left
and right) channels, and the NORMALsystem plays monaural
sound. The normal track is always played so the cassette can
be played on a DVD+Hi-Fi VCR that does not have VHS Hi-Fi.
AUDIO MODE: Choose Hi-Fi or NORMALwith b/B.
BROADCAST TYPE (STEREO/SAP/MONO)
Multichannel Television Sound (MTS) carries stereo and/or
Second Audio Program (SAP) bilingual signals. Set this display to
the desired position when both MTS stereo and SAPsignals are
received. When only one of the MTS signal is received, the DVD+
Hi-Fi
VCR automatically selects the corresponding receiving mode
(Stereo or SAP) regardless of the selected position. For normal
operation, the display should be in the STEREO position.
The
DVD+
Hi-Fi
VCR will then record a STEREO program when available,
and record a mono program IF the program is NOTIN STEREO.
For weak STEREO and/or SAPbroadcasts, changing the dis-
play to mono may give clearer sound.
BROADCASTTYPE: Choose STEREO, SAP, or MONO with
b/B.
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
Used during playback [when AUDIO MODE (HI-FI/NORMAL) is
in HI-FI position] for selecting the audio output signals from the
AUDIO OUTterminals (L ch and R ch), and RF.OUT.
This display setting should normally be left in the stereo posi-
tion, so that when a stereo tape is played, the stereo sound will
be heard through the left and right channels. If a mono tape is
played and the audio output is set to stereo, the same mono
sound will be heard from both left and right channels.
AUDIO OUTPUT: Choose STEREO, LEFT, or RIGHTwith
b/B.
44
Press MENU when finished.
Channel Selection
This DVD+VCR is equipped with a frequency
synthesized tuner capable of receiving up to 181
channels. These include VHF channels 2-13, UHF
channels 14-69 and CATV channels 1-125.
Preparation:
Connect the DVD+Hi-Fi VCR to the desired type of antenna
or cable TV system, as shown in Connecting Antenna/Cable
TV to DVD+Hi-Fi VCR on page 11.
AUTO CHANNEL PROGRAMMING
11
Press MENU and the MAIN menu will appear.
22
Use vv/VVto select the TUNING menu, then press
MEMORY/ENTER.
The TUNING menu will appear.
33
Use VVto choose the SOURCE SELECT option,
then use bb/BBto select TUNER.
Press b/Brepeatedly to switch among TUNER, LINE1 or
LINE2.
44
Use vv/VVto choose the AUTOCHANNEL SET option,
then use bb/BBto search for channels.
The tuner will automatically cycle through all
available channels in the area and place them in
the tuner’s memory.
55
After the AUTO CHANNELSET PROCEEDING is
complete, make sure the TUNING BAND is set
appropriately (TV or CATV). Choose the correct
TUNING BAND (TV or CATV) with bb/BBwhile in
the TUNING menu.
Remember, TV is for the air antenna reception,
CATV is for cable or wireless cable connection.
66
Press MENU to return to the TV screen.
77
Use TUNING (vv/VV) on the front panel or CH/TRK
(vv/VV) on the remote control to cycle the
DVD+Hi-Fi VCR through the channels in memo-
ry.
TO ADD ORERASE CHANNELS FROM MEMORY
This feature allows you to add or erase channels from
memory manually.
1Use VVto choose the CH. ADD/DEL option on the
TUNING menu. Use b/Bto select a channel to add
or erase.
2Use MEMORY/ENTER to add or erase the channel.
Repeat steps 1 and 2 to add or erase channels.
3Press MENU to remove menu.