VCR Operation (Continued)
Instant Timer Recording
Instant Timer Recording allows you to make a recording easily of a preset length without using the programma- ble timer.
Preparation:
Turn on the power of both the
Be sure the TV is tuned to the
If a direct VIDEO/AUDIO connection is made between the
VIDEO.
Insert a video cassette with the anti erasure
1 safety tab intact.
Select the desired channel with v/V or number
2
The channel number appears on the TV screen.
If you are recording from another source via audio/video input jacks (at the Rear or Front panel), select LINE1 or LINE2. with INPUT.
3 Select the desired recording speed (SP or SLP) with SPEED.
The tape speed will appear on the TV screen.
4The menu as illustrated, will appear on the TV screen.
Recording will start. (The 
indicator will light)Press REC/ITR (z) twice.
5recording time length.
At the end of the recording, the
Whlie Instant Timer Recording is active, changing the
channel on the
INSTANT TIMER RECORD MENU
INSTANT TIMER RECORD | 0H30M ..... 9H00M ➝ 0H00M | |||||
CHANNEL | 2 |
|
|
|
| |
|
| Length Display | ||||
SPEED | SP |
|
| |||
(each additional press of | ||||||
|
| |||||
START | NOW | REC/ITR (z) increases recording | ||||
LENGTH | 0H30M |
|
| time 30 minutes) | ||
|
|
|
|
|
| |
Checking the Recording Time
Press REC/ITR (z) once to check the recording time. The recalled setting will automatically return to the TV screen after 6 seconds.
To extend the Recording Time
The recording time can be extended anytime by press- ing REC/ITR (z).
Subsequent presses result in advancing the recording time by
otes
If you press PAUSE/STEP (X) while in instant timer record- ing mode, the
If the
Dubbing and Editing
If you wish to edit or dub your camcorder (or another VCR) recordings to this
1outputs to your
13.Connect the camcorder’s (or another VCR’s) A/V
2 Set the input channel “LINE2”. (Use INPUT to select LINE2.)
If you have connected your
3VCR). If you have a TV attached to your
4
otes
Before recording, please confirm the recording start position. To stop the editing, press STOP (x) twice.
Copying from DVD to VCR
This unit is capable of copying the contents of a DVD to a VHS tape.
ote
If the DVD you are attempting to copy is copy protected, you will not be able to copy the disc. It is not permitted to copy Macrovision encoded DVDs. “LOCK” is displayed in the display window.
Insert Disc
1 Insert the disc you wish to copy in the DVD deck and close the disc tray.
Insert VHS Tape
2 Insert a blank VHS video tape into the VCR deck.
Press PLAY ( B) on the DVD deck.
3 The DVD will go into play mode
If the DVD disc menu appears, you may need to press PLAY ( B) manually to begin copying.
4 Press REC/ITR (z) on the front panel or remote control.
The
Stop the Copy Process
5 When the DVD is finished playing, press STOP (x) or POWER twice to end copying.
You must stop the Copy process manually when the DVD movie ends, or the unit may replay and record over and over again.
ote
When you stop the DVD playback during copying, VCR recording mode also stops automatically.
26
