Kohler 1198326-2-A manual Troubleshooting cont, Kohler Co

Models: 1198326-2-A

1 44
Download 44 pages 12.62 Kb
Page 14
Image 14
Troubleshooting (cont.)

Troubleshooting (cont.)

Symptoms

Probable Causes

Recommended Action

5.

Blower motor starts, some

A.

Blower motor speed is too low.

A.

Increase speed.

 

but not all airjets are

B.

Blower motor inlet is blocked.

B.

Clean blower motor inlet.

 

working.

 

 

 

 

 

C.

Blower motor does not work.

C.

Replace the blower motor.

 

 

 

 

D. Blower motor discharge is

D. Clear blockage.

 

 

 

blocked.

 

 

 

 

E.

Check valve does not work.

E.

Replace the check valve.

 

 

F.

Airjets are clogged.

F.

Use a small between-the-teeth

 

 

 

 

 

dental brush and white vinegar.

 

 

 

 

 

Dip the brush in the vinegar, brush

 

 

 

 

 

the hole, rinse the brush in clean

 

 

 

 

 

water, and then use the wet rinsed

 

 

 

 

 

brush to rinse the hole.

6.

Blower motor runs but no

A.

Blower motor inlet is blocked.

A.

Clean blower motor inlet.

 

air bubbles are observed.

B.

Airjets are clogged.

B.

Use a small between-the-teeth

 

 

 

 

 

dental brush and white vinegar.

 

 

 

 

 

Dip the brush in the vinegar, brush

 

 

 

 

 

the hole, rinse the brush in clean

 

 

 

 

 

water, and then use the wet rinsed

 

 

 

 

 

brush to rinse the hole.

 

 

C.

Check valve does not work.

C.

Replace the check valve.

 

 

D.

Blower motor does not work.

D.

Replace the blower motor.

7.

Blower motor operates,

A.

Blower motor inlet is blocked.

A.

Clean blower motor inlet.

 

air bubbles are observed,

B.

Loose, disconnected, or

B.

Check wiring for proper

 

but speed feature does

 

damaged wiring harness.

 

connections. Replace the wiring

 

not work.

 

 

 

harness if necessary.

 

 

C.

User keypad does not work.

C.

Replace the user keypad.

 

 

D.

Blower motor does not work.

D.

Replace the blower motor.

8.

Blower motor does not

A.

User keypad does not work.

A.

Replace the user keypad.

 

turn off when the On/Off

B.

Loose, disconnected, or

B.

Check wiring for proper

 

button is pressed.

 

damaged wiring harness.

 

connections. Replace the wiring

 

 

 

 

 

harness if necessary.

 

 

C.

Control does not work.

C.

Replace the control.

9.

Purge mode does not

A.

User keypad does not work.

A.

Replace the user keypad.

 

work.

 

 

 

 

 

 

B.

Control does not work.

B.

Replace the control.

10.

Bath does not purge

A.

Blower does not work.

A.

Replace the blower.

 

automatically.

 

 

 

 

 

 

 

 

 

 

1198326-2-A

14

Kohler Co.

Page 14
Image 14
Kohler 1198326-2-A manual Troubleshooting cont, Kohler Co