responds correctly then your touch panel is accurately aligned to your monitor.
12.Touch [OK] button to exit and the [Reboot Message Dialog Box] will appear.
13.Remove the setup diskette from the floppy disk and click [Reboot] button after [Installation Driver OK] appear.
14.If you choose [Right Button ON] when you complete installing the Software Driver, you will find the Right Button Icon appeared on the
15.To make changes to the Right button feature settings, click the [Onetouch Icon]on the taskbar.To make changes to the COM port, mouse driver feature settings, click the Start button choose Program, point to Onetouch Config.exe icon.
*Note : If you are not satisfied with the screen alignment, select the [Retry] button (This can be done by typing [R] on the keyboard).
24