**Note: 640 x 480 (step 12) refers to your monitor screen resolution. If you change these settings you will have to run the position alignment program again. You can change the COM Port or Mouse Device Driver in the Autoexec.bat file with the DOS Edit program. The COM port or Mouse drive can be changed with the Edit program in AUTOEXEC.BAT
The AUTOEXEC.BAT default settings are as follows:
CD\INTC
INCMOUSE
XMOUSE
INTCMS 1
CD\
To change the COM port add the following:
CD\INTC
INMOUSE
XMOUSE
INTCMS 2
CD\
To change the mouse driver add the following:
CD\INTC
C:\LOGITECH\LMOUSE
INTCMS 1
CD\
26