RPD-1151/1158 User Manual

Note: 1. The keys must be on the same side (both left, or both right) 2. You can optionally change the hotkey to

the Scroll Lock key (see F6,

 

LIST:ALL

 

 

 

 

 

 

PN￿

QV￿

PC￿

NAME

 

 

below), in which case you would

 

 

 

 

2-5￿￿

 

+￿￿ ABC

 

 

 

press [Scroll Lock] twice.

 

 

 

 

 

 

2-6￿￿￿

 

XYZ

 

 

 

 

 

 

 

 

 

 

 

 

 

OSD always starts in List view,

 

2-7

 

 

 

 

 

 

 

2-8

 

 

 

 

 

 

with the highlight bar at the same

 

3

 

 

 

 

 

 

 

4

 

 

 

 

 

 

position it was in the last time it

 

5-1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5-2

 

 

 

 

 

 

was closed.

 

 

 

 

 

 

 

F1

F2

F3

F4

F5

F6

 

GOTO

SCAN

LIST

QV

EDIT

SET

The next two sections explain how to

navigate using the OSD and Hotkey methods.

5.5.2OSD Navigation

[Esc] cancels the current selection, or dismisses the current menu and moves back to the menu one level above. If you are at the highest menu level, it deactivates OSD.

Use the Up and Down Arrow Keys or click on the Up and Down Triangle symbols (στ) to move up or down through the list one line at a time.

Use [Pg Up] and [Pg Dn] or click on the Up and Down Arrow symbols (Ï Ð) to move up or down through the list one screen at a time

To activate a port, move the Highlight Bar to it then press [Enter].

After executing any action, you automatically go back to the menu one level above.

5.5.3Hotkey Navigation

Hotkey navigation can also be used under OSD as follows: From the OSD Main Menu, press [Ctrl]+[Alt]+[Shift].

Key in the Port ID for the computer you wish to access (see Port ID Numbering, above), then press [Enter].

The console now controls the computer that you have selected, and the OSD automatically closes.

When you use this method, note the following:

i.Although access switches to the port you just specified, the highlight bar on the OSD screen doesn’t move.

ii.You must press [Ctrl], [Alt], [Shift] one after the other - not all at the same time.

iii.After pressing the [Ctrl]+[Alt]+[Shift] combination, you must key in the Port ID and press [Enter] within 1 second for each keypress.

iv.The keys must be pressed and released one key at a time.

33