RPD-1151/1158 User Manual

5.2.2Single Station Installation

In a Single Stage installation, there are no additional KVM switch daisy chained down from the RPD-1158. To set up a single stage installation, do the following:

1.Use connector cable sets (as described in the Hardware Requirements section), to connect any available monitor, keyboard and mouse ports of the computer you are installing.

2.Plug the adapter cable into the RPD-1158's power jack, then plug the power adapter into an AC power source.

3.Turn on the power to the computers

5.2.3Two Station & Three Installation

With the combination of KVM switch box, you can cascade up to two or three levels. For two or three stage installation, please refer to the manuals in the KVM switch box.

 

SYSTEM 8

SYSTEM 7

SYSTEM 6

SYSTEM 5

AC/IN 90V~264V

POWER ON/OFF

SYSTEM 3

SYSTEM 2

SYSTEM 1

 

SYSTEM 4

The rear view of the RPD-1158

Note: We strongly recommend you directly contact your dealer for KVM switch boxes.

29