Pressing [F6] brings up an OSD configuration menu. To change a setting:
1.Move the highlight bar to the choice you want, then press [Enter].
2.On the submenu that appears next, move the highlight bar to the choice you want and press [Enter].
An icon of a pointing finger indicates which choice is the currently selected one. An explanation of the choices is given in the table, below:
Setting |
| Function |
|
CHANNEL |
| To select how the Port ID is displayed: the Number plus the | |
DISPLAY MODE |
| Name (PN + NAME); the Number alone (PN); or the Name | |
|
| alone (NAME). | |
CHANNEL |
| To determine how long a Port ID displays on the monitor after a | |
DISPLAY |
| port change has taken place: 3 Seconds; or Always On. | |
DURATION |
|
|
|
CHANNEL |
| To position where the Port ID appears on the screen. Use the | |
DISPLAY |
| Arrow Keys, Pg Up, Pg Dn, Home, End, and 5 (on the numeric | |
POSITION |
| keypad with Num Lock off), to position the Port ID display, then | |
|
| press [Enter] to lock the position and return to the Set | |
|
| submenu | |
SCAN DURATION |
| To determine how long the display dwells on each port as it | |
|
| cycles through the selected ports in Quick View Scan Mode. | |
|
| The available options are: 3, 5, 10, 15, 20, 30, 40, and 60 | |
|
| seconds. | |
OSD ACTIVATING |
| To select which Hotkey activates the OSD function: [Ctrl] | |
HOTKEY |
| [Ctrl] or [Scroll Lock] [Scroll Lock]. The default is the Ctrl | |
|
| key combination, but this may conflict with programs running | |
|
| on the computers, in which case, the Scroll Lock option should | |
|
| be used. | |
SET PASSWORD |
| To set a password in order to control access to: | |
|
| Locking/Unlocking the Console; Clearing the Name List; and | |
|
| Restoring Default Values. See OSD Security Features, below, | |
|
| for password setting details. | |
CLEAR THE NAME |
| To clear all Port Names from the Name List. You are asked to | |
LIST* |
| confirm before the procedure goes on. Key in Y, then press | |
|
| [Enter] to confirm. While the names are being cleared, a | |
|
| message appears on the display to indicate so. After the | |
|
| names have been cleared, another message appears to | |
|
| indicate that the procedure completed successfully | |
RESTORE |
| To clear all settings from memory, and returns the unit to the | |
37