Kompernass KH 2295 Using the RDS Radio Alarm, Using the radio of the RDS Radio Alarm

With the buttons O resp. A you can switch between both display formats.

11When the desired indicator format is blink- ing in the display D: Wait for ca. 10 sec- onds, without pressing a button. The dis- play D returns to its normal status; the time is now shown in the selected display format. The date is only shown when the radio is switched off.

8. Using the RDS Radio Alarm

8.1Using the radio of the RDS Radio Alarm

The RDS Radio Alarm is fitted with an auto- matic station scanner with an automatic save function. The station scanner starts automa- tically, as soon as the RDS Radio Alarm is con- nected to mains power. If you would like to use the station scanner again at a later time:

8.1.1Using the automatic radio station scanner

With the radio switched on, hold the button “Memory” G pressed down for ca. three sec- onds. The automatic station scanner now starts; Stations with sufficient reception strength are now automatically saved to fixed programme positions.

8.1.2Manually setting and saving radio stations

If you wish to save other radio stations additio- nally to the ones automatically saved to fixed programme positions:

1Search for a radio station with the buttons

O resp. A. With each press of the key you will shift the frequency in steps of 50 kHz.

Alternatively, you can also keep the buttons O resp. A pressed for a short period; this starts the manual station scanner. If a station is found with sufficient reception strength, the station scanner stops.

If a radio station you are searchuing for is being received, you can save it to one of the 50 fixed programme positions. Additionally:

ÔNote:

To carry out the steps 2 to 4 you have ca. 5 se- conds for each step. If one step is delayed, you must start again from step 2.

2Press the button “Memory” G once. In the display D a two-figure programme position number as well as “GROUP” is shown, the clock symbol and “MEM” are blinking. To designate a programme position number for the tuned radio station:

3First of all select the number for the first digit of the programme position number. For this, repeatedly press the button “Group WEC” F. As soon as the desired figure for the first digit of the programme position is shown in the display D:

4Select the figure for the second digit of the two-figure programme position number. Repeatedly press the buttons “0/5” to “4/9”. The buttons have the following functions:

ÚButton “0/5” ; – for selection of 0 resp. 5 as the second digit of the programme position

ÚButton “1/6” L – for selection of 1 resp. 6 as the second digit of the programme position

ÚButton “2/7” K – for selection of 2 resp. 7 as the second digit of the programme position

    12