RDS Radio Alarm E-Bench KH 2295
1. Intended use
The RDS Radio Alarm is intended exclusively …
Úfor the reception of VHF/FM radio stations
Úas an alarm
Úfor stationary operation in covered areas
Úfor private,
2. Technical data
Power supply:
230 V ~ / 50 Hz, 5 W Reception range UKW/FM: 87,5 – 108,5 MHz
3. Safety Instructions
Read the operating instructions carefully before using the appliance for the first time and pre- serve this booklet for later reference. Pass this booklet on to whoever might acquire the appli- ance at a future date.
†Danger!
Should moisture/water permeate into the RDS Radio Alarm, …
Úthere is the risk of receiving an electric shock!
Úit could be irreparably damaged! Thus:
DO NOT use or store the RDS Radio Alarm …
Úin moist environments!
Úin close proximity to water! Additionally, NEVER subject the RDS Radio Alarm to spray or rain water.
ÚNever place
Exposure to strong heat sources can lead to an overheating of the RDS Radio Alarm and to the melting of plastic parts. This could irreparably damage the RDS Radio Alarm, and there is the additional risk of a fire! Thus:
ÚDo not place the RDS Radio Alarm in close adjacency to sources of heat.
ÚDo not place any open fire sources – e.g. burning candles – on the RDS Radio Alarm!
ÚDo not cover the ventilation openings of the
ÚDo not use or store the RDS Radio Alarm in dusty environments. Otherwise dust could penetrate into the RDS Radio Alarm. If large quantities of dust enter into the RDS Radio Alarm it could overheat and be irrep- arably damaged. There is also the risk of a fire!
In the case of a defect, never attempt to repair the power cable yourself! There is the risk of receiving an electric shock! Instead, consult our service partner responsible for your country. Contact information for our service partners is
