Flash modes
To use the built-in flash, simply raise it (1). Lower the flash unit to prevent it from firing. Flash-mode indicator turns red while the flash is charging; wait until it becomes white before taking pictures.
To change the flash mode, simply press the flash mode button
(2) until the appropriate mode is indicated.
Autoflash - the flash fires automatically in low-light and backlit conditions.
Red-eye reduction - multiple flashes are used before the main flash burst to reduce red-eye; an effect caused by light reflected from the retina. Use in low-light conditions when tak- ing photographs of people or animals. The pre-flashes contract the pupils of the subject’s eyes.
Fill-flash - the flash fires with each exposure regardless of the amount of ambient light. Fill-flash can be used to reduce harsh shadows caused by strong direct light or sunshine.
Slow sync. - flash and ambient light exposures are bal- anced; red-eye reduction is used. Use slow sync. when in dark locations to reveal background details. Ask your sub- ject not to move after the flash burst; the shutter may still be open for the background exposure. Because expo- sures can be long, the use of a tripod is recommend- ed.
Flash cancel - the flash is down and cannot fire.
1 
26
Basic
recording
