Konica Minolta 109678, 9222-2733-11, MS-A406, 0406 Using the Continuous-advance modes

Using the Continuous-advance modes

The continuous-advance drive modes allow a series of images to be captured while holding down the shutter- release button. These drive modes are set in section 1 of the recording menus.

Immediately after selecting the continuous option on the menu, a selection screen is displayed to select between standard and UHS continuous advance. Use the left/right keys of the controller to select the continuous advance mode. Press the central button of the controller to set the drive mode. Pressing the menu button cancels the operation without changing the drive mode.

Compose the picture as described in the basic recording operation section (p. 22). Press the shutter-release button partway down (1) to lock the focus and exposure for the series.

Press and hold the shutter-release button all the way down

(2)to begin taking pictures; focus is locked with the first frame. When the shutter-release button is pressed and held, the camera will begin recording images until the maximum number has been taken or the shutter button is released.

The maximum number of frames and the rate of capture depends on the continuous-advance drive mode selected. See the notes section on the following page.

Drive mode	Single
Image size	Self-timer
Quality	Continuous
	Progressive
White balance
Key func.	Bracketing

	:select	:enter
1	2

48Advanced recording