Konica Minolta 109678, 9222-2733-11, MS-A406, 0406 + button, Adjusting monitor brightness

i+ button

Pressing the information (i+) button changes the monitor display. The display cycles among the stan- dard display, real-time histogram, and live image only.

Standard display Real-time histogram Live image only

The real-time histogram shows the approximate luminance distribution of the live image. This histogram cannot show the affect of flash illumination. The histogram of a recorded

image may not show the same distribution as the real-time	Information button
histogram.

Adjusting monitor brightness

The monitor image can be made lighter or darker. The brightness level can be set individually for viewfinder and direct viewing. Turn the mode switch to the appropriate position. Press and hold the information (i+) button to open the LCD brightness screen.

Use the left/right keys of the controller to adjust the brightness; the monitor image changes accordingly. Press the center of the controller to set the brightness level or press the menu button to close the screen without applying any changes.

Set LCD brightness

Low High

:adjust :enter

28Basicrecording