Faxing 5
bizhub 160f 5-17
To fax documents positioned on the original glass
1Press the [Fax] key to enter fax
mode.
2Lift open the automatic document
feeder.
3Position the document to be faxed
face down on the original glass.
4Align the document on the scales
above and to the left of the original
glass.
5If necessary, change the resolution setting (p. 5-14).
6Using the 10-key pad, enter the fax
number of the recipient, and then
press the [Yes] key.
– The fax number of a previously
programmed recipient can also be specified. Refer to “Dialing” on
page 5-3.
7Press the [Start] key to display a message confirming the size of the
loaded document page. If the indicated page size is correct, press the
[Yes] key. To scan multiple document pages, continue loading pages
and pressing the [Yes] key until all pages are scanned. After scanning
all document pages to be faxed, press the [Start] key to begin sending
the fax.
Once transmission is finished, a beep is sounded.
If the fax could not be sent, the transmission result report is printed
(p. 7-76).
?Do you want to stop the transmission?
%To stop the transmission, press the [Stop] key.