Using the utility mode 7
bizhub 160f 7-49
To change/delete a programmed relay initiation transmission
1Select the PROGRAM DIAL in the
FAX REGISTRATION menu.
For details, refer to page 7-27.
2Press the one-touch dial key ([12]
through [15]) programmed with the
relay initiation transmission that you
wish to change or delete.
3Press the [No/C] key.
4Using the [*] and [)] keys, select ei-
ther EDIT or DELETE, and then
press the [Yes] key.
–If EDIT was selected, the speci-
fied recipient is displayed. (Continue with step 6.)
–If DELETE was selected, the program dialing settings are deleted
and the SELECT REGIST.KEY screen appears again.
5To change the recipient, press the
[No/C] key, and then by using the
one-touch dial keys or the speed dial
numbers, or by entering the fax
number using the 10-key pad, speci-
fy a different recipient.
6Press the [Yes] key.
The relay box ID is displayed.
7To change the relay box ID, press the
[No/C] key, and then use the 10-key
pad to enter the new ID.
8Press the [Yes] key.
The password is displayed.