6Fax transmission/Reception methods
6-10 bizhub 160f
5Specify the fax number of the recipient.
Repeat the appropriate operations described below until all recipients
have been specified.
?Do you want to use one-touch dial keys?
%Press the one-touch dial key pro-
grammed with the desired fax
number.
%Press the [Yes] key, and then
specify the next recipient.
?Do you want to use speed dial
numbers?
%Press the [Speed Dial] key, and
then use the 10-key pad to enter
the 3-digit speed dial number
programmed with the desired fax
number.
%Press the [Yes] key, and then
specify the next recipient.
?Do you want to use group dialing?
%Press the one-touch dial key programmed with the desired group
of fax numbers.
%Press the [Yes] key, and then specify the next recipient.
?Do you want to select from the phone book?
%Press the [Phone Book] key, and then select either LIST or
SEARCH to select the desired fax number.
For details, refer to “To fax using the phone book” on page 5-10.
%Press the [Yes] key, and then specify the next recipient.
?Do you want to enter the number using the 10-key pad?
%Enter the fax number of the recip-
ient.
%Press the [,] key. F codes (SUB
and SID) can also be entered.
%Press the [Yes] key, and then specify the next recipient.
?Has the wrong fax number been specified?
%Press the [No/C] key to delete the current selection. This is valid
only before the recipient is set by pressing the [Yes] key.