7Using the utility mode
7-64 bizhub 160f
Specifying MEMORY RX MODE
1Select the MEMORY RX MODE in
the RX OPERATION menu.
For details, refer to page 7-63.
2Using the [*] and [)] keys, select
ON, and then press the [Yes] key.
3Using the 10-key pad, enter the time
for memory reception to begin, and
then press the [Yes] key.
To specify that memory reception
stays on from the time that it is set to ON until it is manually can-
celed, press the [Yes] without entering a start time. (Skip to step 6.)
4Using the 10-key pad, enter the time
for memory reception to end, and
then press the [Yes] key.
5Using the 10-key pad, enter the 4-
digit password used to cancel mem-
ory reception, and then press the
[Yes] key.
If no password is to be specified, press the [Yes] key without enter-
ing anything.
The RX OPERATION menu appears again.