5Faxing
5-6 bizhub 160f
To fax using speed dialing
If speed dial numbers have already been programmed, the fax number of a
recipient can be specified quickly by entering the corresponding speed dial
number.
1Press the [Fax] key to enter fax mode.
2Load the document into the automatic document feeder.
3If necessary, change the resolution setting (p. 5-14).
4Press the [Speed dial] key, and then
use the 10-key pad to enter the 3-
digit speed dial number.
?Has the wrong speed dial number
been entered?
%Press the [No/C] key, and then
enter the correct number.
5Press the [Start] key to begin scan-
ning and sending the fax.
!Detail
For details on programming speed dial numbers, refer to “Specifying
SPEED DIAL” on page 7-32.