Using the utility mode 7
bizhub 160f 7-43
To change/delete a programmed timer transmission
1Select the PROGRAM DIAL in the
FAX REGISTRATION menu.
For details, refer to page 7-27.
2Press the one-touch dial key ([12]
through [15]) programmed with the
timer transmission that you wish to
change or delete.
3Press the [No/C] key.
4Using the [*] and [)] keys, select ei-
ther EDIT or DELETE, and then
press the [Yes] key.
–If EDIT was selected, the pro-
grammed transmission time is displayed. (Continue with step 6.)
–If DELETE was selected, the program dialing settings are deleted
and the SELECT REGIST.KEY screen appears again.
5To change the transmission time,
press the [No/C] key, and then use
the 10-key pad to enter the correct
time. If you do not wish to change the
transmission time, press the [Yes]
key.
The recipient is displayed.
6To change the recipient, press the
[No/C] key, and then by using the
one-touch dial keys or the speed dial
numbers, or by entering the fax
number using the 10-key pad, speci-
fy a different recipient.
– Change the F codes (SUB and SID) as desired.