Using the utility mode 7

bizhub 160f 7-3

7 Using the utility mode

There are fifteen menus in the utility mode.

No. Name Description
1 MACHINE
SETTING Used to specify settings for the machine’s operating environment.
2 PAPER SOURCE
SETUP Used to specify the size and type of paper loaded in tray1. In ad-
dition, auto tray switching can be enabled for each tray.
3USER MANAGE-
MENT Used to specify settings after the drum cartridge is replaced.
4 ADMIN.MANAGE-
MENT Used to specify setting for the administrator.
5 COPY SETTING Used to specify the default settings for each copy function.
6 FAX REGISTRA-
TION Used to specify the default setting for each fax function.
7 TX OPERATION Used to specify the default setting for TX operation.
8 RX OPERATION Used to specify the default setting for RX operation.
9 COMM. SETTING Used to specify the default setting for communicating environ-
ment.
10 REPORTING Used to specify the default setting for each report function.
11 INITIAL USER DATA Used to specify setting for the initializing user data.
12 NETWORK SET-
TING Available only if the optional network interface card NC-501 is in-
stalled. For details, refer to the User’s Guide for the network inter-
face card (NC-501).
13 E-MAIL SETTING 1 Available only if the optional scanner unit SU-502 is installed. For
details, refer to the User’s Guide for the scanner unit SU-502.
14 E-MAIL SETTING 2
15 SCAN SETTING