8When a message appears
8-28 bizhub 160f
8.9 What does each message mean?Message Cause Action
*REMOVE PAPER IN BYPASS
TRAY* Paper is loaded in the by-
pass tray. Remove the paper from the
bypass tray.
FRONT COVER OPEN
CLOSE FRONT COVER
The front cover of the main
unit is open or not securely
closed.
Securely close the front cov-
er.
DOCUMENT COVER OPEN
CLOSE DOCUMENT COVER
The automatic document
feeder is lifted up (while a
document is loaded into it).
Securely close the automatic
document feeder or remove
the document from the auto-
matic document feeder.
DOC.FEED COVER OPEN
CLOSE DOC.FEED COVER
The document feeder cover
is open. Securely close the document
feeder cover.
MEMORY FULL
PRESS ANY KEY
The size of the data for the
scanned document has ex-
ceeded the capacity of the
memory.
Press the [Panel reset] key,
or turn the machine off, then
on again. (The scanned data
should be cleared from the
memory.)
MACHINE TROUBLE
SERVICE CALL (C####)
Some problem occurred in
the machine. Turn the machine off, then on
again. If the error is still dis-
played, contact your service
representative.
FUSER COVER OPEN
CLOSE FUSER COVER
The fuser cover of the main
unit is open or not securely
closed.
Securely close the fuser cov-
er.
PAPER JAM
OPEN FRONT COVER
A paper misfeed occurred. Perform the misfeed-clearing
procedure. (page8-18)
All misfed paper was not re-
moved from the main unit.
The fuser cover of the main
unit is open or not securely
closed.
Close the fuser cover, then
open and close the front cov-
er.
NO SUITABLE PAPER
LOAD PAPER (LT)
In fax mode, plain paper of a
size other than letter, legal or
A4 is loaded into the paper
tray.
Load plain paper of the ap-
propriate size into tray 1 or
the optional tray 2.
INCORRECT T/C TYPE
CHANGE T/C
Incorrect type of toner car-
tridge is installed. Install the correct type of
toner cartridge. (p.8-6)
Toner cartridge is not in-
stalled. Install the toner cartridge.
(page8-7)