3Before making copies
3-56 bizhub 162/210
3.15 Interrupting copy jobs
Long continuous copy operations can quickly be paused by pressing the [In-
terrupt] key in order to copy a different document.
2
Note
Some functions cannot be interrupted. In addition, some functions are
not available while a copy job is interrupted. For details, refer to “Function
combination matrix” on page 9-10.
If the document is placed on the original glass and 2in1 or 4in1 copies are
being produced, the copy job cannot be interrupted.
To interrupt a copy job
1Press the [Interrupt] key.
The interrupt indicator lights up. The
current copy operation is paused. All
functions are reset to their defaults.
2Remove the current document. Posi-
tion the other document that you
wish to copy.
3Specify the desired copy settings.
For details, refer to “Making a basic
copy” on page 4-3.
4Using the 10-key pad, enter the
number of copies to be made.
5Press the [Start] key.
This will start the copy cycle.
6After the other document is copied,
press the [Interrupt] key.
The interrupt indicator goes off. All
copy functions return to their previous settings.