6Advanced copy operations
6-22 bizhub 162/210
6.7 Programmed copy jobs
Store up to two of the more frequently used copy setting programs for im-
mediate recall when necessary.
2
Note
Copy programs cannot be stored while the machine is warming up or
while a copy job is paused (Interrupt mode).
To store a copy program
1Specify the desired copy settings.
For details, refer to “Making a basic copy” on page 4-3.
– The zoom ratio can be set between × 0.50 and × 2.00.
2Press the [Copy program] key.
3Press the [*] and [)] keys to select
REGIST..
4Press the [Yes] key.
5Using the [*] and [)] keys, select the
program number where you wish to
store the copy program.
6Press the [Yes] key.
This will start the copy cycle.
2
Note
If two copy programs have already been stored, the copy settings previ-
ously stored under the selected program number are deleted and re-
placed with the new ones.