Before making copies 3
bizhub 162/210 3-19
3.6 Useful functionsAuto panel reset
Even if the [Panel reset] key is not pressed, the machine automatically resets
all functions and settings to their defaults 1 min after a copy cycle has been
completed or a key operation is performed.
The length of time before the machine automatically resets itself can be set
between 1 min and 5 min in addition to 30 seconds. The auto panel reset
function can even be disabled.
!
Detail
For details, refer to “Specifying AUTO PANEL RESET” on page 7-6.
Energy save mode
Instead of turning off the machine, it can be set into a standby state (energy
save mode).
If the machine is not used for a set length of time, it will automatically enter
the energy save mode. The default length of time is 15 min.
To cancel the energy save mode, press any key on the control panel.
The length of time before the machine enters the energy save mode can be
set between 1 min and 240 min.
When the machine is in energy save mode, the indicator on the [Start] key
remains lit in green, but the display goes off.
2
Note
If the auto shut off function is activated during energy save mode, the ma-
chine turns off.
!
Detail
For details, refer to “Specifying ENERGY SAVE MODE” on page 7-7.