7Using the utility mode
7-36 bizhub 162/210
Specifying ERASE SETTING
1Select ERASE SETTING in the
COPY SETTING 1 menu.
For details refer to page 7-31.
2Press the [*] and [)] keys to select
either LEFT, UPPER or FRAME.
3Press the [Yes] key.
4Using the 10-key pad, enter the
width of the area to be erased. The
width of the area to be erased can be
set between 5 mm and 20 mm.
?Do you want to correct the erase
setting?
%Press the [No/C] key and enter the correct setting.
5Press the [Yes] key.
The COPY SETTING 1 menu appears again.