Before making copies 3
bizhub 162/210 3-41
3.11 Selecting the paper source
The paper used for making copies can be selected in two ways.
-Auto paper:
If the auto paper function is selected, the paper tray containing the most
suitable size of paper is selected based on the size of the document and
the specified zoom ratio.
-Manual paper selection:
The paper that you wish to use for copying can be selected.
To make copies using the auto paper function
1Load the document in the document feeder.
For details, refer to “Loading the document” on page 4-10.
2Press the [Auto paper/Auto size] key
until the auto paper function is se-
lected.
AUTO appears in the bottom line of
the screen.
3Specify the desired copy settings.
For details, refer to “Making a basic
copy” on page4- 3.
4Using the 10-key pad, enter the number of copies to be made.
5Press the [Start] key.
This will start the copy cycle.
2
Note
If APS SIZE ERROR appears in the display immediately after the [Start]
key is pressed, no tray is loaded with paper of the most suitable size. Ei-
ther load paper with the appropriate size, or press the [Paper] key and se-
lect the desired paper size, and then press the [Start] key again.