Installing the Printer Driver
4
4 Installing the Printer Driver
This section describes the procedure for installing the printer driver. The printer driver can be installed in two ways: by using Plug and Play or by using the Add Printer Wizard.
If you want to use | Follow this procedure: |
this function to |
|
install the printer |
|
driver: |
|
Plug and Play | “Installing the Printer Driver Using Plug and Play” |
(for USB connection) | on page |
|
|
Add Printer Wizard | “Installing the Printer Driver Using the Add |
(for parallel | Printer Wizard” on page |
connection) |
|
|
|
For network printing, use the Add Printer Wizard to install the printer driver. During installation, select “LPT1” as the printer port.
For details on specifying network connection settings, refer to the User Manual for the network interface card.
Note
In order to use IPP printing, the IPP printing settings must be specified when the printer driver is installed. For details on specifying the IPP printing settings, refer to the manual provided with the network interface card.
If the PCL printer controller is used on Windows 95, Windows 98, Windows 98SE or Windows Me, the Network Setup utility cannot be used.
Pi1803e/Pi2001e |
