134 Part8:TheMicrophone
Adjusting the stereo position of the microphones (MIC1/2)
For both MIC 1 and MIC 2, you can control the position of the microphone in
the stereo panorama of the audio output signal.
1. Press the MIXER button to access the Mixer Menu.
2. Touch the VOICE P. Setup to access the Voice Processor Setup section.
3. Touch the SETUP button to go to the Setup page.
4. Touch the MIC 1 or MIC 2 tab to select the microphone to program.
5. Touch the Pan control, and use the DIAL or the UP and DOWN buttons to
adjust the location of each mic in the stereo spectrum.
6. Touch the SAVE command to save the settings to a Voice Processor Setup
(more info on page 137).
7. Press the EXIT button to return to the main screen.