Kramer Electronics FC-1ETHN user manual Contents, Figures

Contents

Contents

1	Introduction	1
2	Getting Started	1
3	Overview	1
3.1	Terminology Used in this User Manual	2
3.2	Achieving the Best Performance	3
4	Your FC-1ETHN Ethernet Controller	3
5	Using the Kramer Configuration Manager Software	4
5.1	Installing and Running the Kramer Configuration Manager Software	4
5.2	Understanding the Kramer Configuration Manager Window	4
6	Configuring the FC-1ETHN Ethernet Controller	7
6.1	Configuring the FC-1ETHN via its Serial Port	7
6.2	Configuring the FC-1ETHN via its ETHERNET port	8
6.3	Routing Data in the Slave and Master Routing Modes	9
6.3.1	Slave Routing Mode	9
6.3.2	Master Routing Mode	10
7	Controlling Kramer Machines via Ethernet using the FC-1ETHN	10
7.1	Controlling a Kramer Machine via a Computer	11
7.2	Controlling a Kramer Machine via a Controller	12
8	Flash Memory Upgrade	12
8.1	Downloading from the Internet	12
8.2	Connecting the PC to the RS-232 Port	13
8.3	Upgrading Firmware	13
9	Technical Specifications	16

Figures

Figure 1: FC-1ETHN Ethernet Controller	3
Figure 2: Choose Port Window	4
Figure 3: FC-1ETHN Configuration Manager Window	5
Figure 4: Connecting the FC-1ETHN in the Slave Routing Mode	9
Figure 5: Connecting the FC-1ETHN in the Master Routing Mode	10
Figure 6: Connecting the FC-1ETHN in the Master Routing Mode	11
Figure 7: Splash Screen	13
Figure 8: Atmel – Flip Window	14
Figure 9: Open Configuration File Select Window	14
Figure 10: Atmel – Flip Window (RS-232 Communication)	14
Figure 11: RS-232 Window	15
Figure 12: Atmel – Flip Window (Connected)	15
Figure 13: Atmel – Flip Window (Operation Completed)	16

i