Kramer Electronics FC-1ETHN user manual Figure A1 Virtual Serial Port Manager

ADDENDUM: FC-1ETHN

Figure A1: Virtual Serial Port Manager Figure A2: Virtual Serial Port Properties

Amendment to Section 7

In section 7.1 (on page 11) steps 5, 6, and 7 are replaced by the following:

5.Connect the ETHERNET port of your FC-1ETHNto a LAN, using a straight-through cable with RJ-45 connectors.

You can control from up to three computers (each with the Kramer Windows®-control software).

6.Run the Kramer Windows®-control software to control the Kramer machine from each computer.

When working with a non-Kramer device, use their existing PC software or the Microsoft HyperTerminal.

7.In the K-Router Port window, choose the COM port according to the number of your virtual Serial port:

In section 7.1 (on page 11) Figure 6 is replaced by the following:

Figure A3: Choosing the COM Port

A2 KRAMER: SIMPLE CREATIVE TECHNOLOGY