ADDENDUM: Ethernet Cross Cable Wiring Connection
This addendum describes the correct wiring for crossover cable connections and replaces the opening paragraph in the "Connecting the ETHERNET Port directly to a PC (Crossover Cable)" section in the User Manual as follows:
Connecting the ETHERNET Port directly to a PC (Crossover Cable)
You can connect the Ethernet port of the machine to the Ethernet port on your PC, via a crossover cable with
Table 1 and Figure 1 define the color codes for the two existing standard types of cross cables used in the industry. Table 2 defines how to connect the wires to the connectors on both ends of the cable.
When manually connecting the ends of a cable, both connectors must follow the same standard (either EIA /TIA 568A or EIA /TIA 568B).
Table 1: Crossover Cable RJ-45 Types
1 8
EIA /TIA 568B
PIN | Wire Color |
1 | |
|
|
2 | Orange |
|
|
3 | |
|
|
4 | Blue |
|
|
5 | |
|
|
6 | Green |
|
|
7 | |
|
|
8 | Brown |
|
|
| EIA /TIA 568A | |
PIN |
| Wire Color |
1 |
| |
|
|
|
2 |
| Green |
|
|
|
3 |
| |
|
|
|
4 |
| Blue |
|
|
|
5 |
| |
|
|
|
6 |
| Orange |
|
|
|
7 |
| |
|
|
|
8 |
| Brown |
|
|
|
TOP
FRONT |
|
1 | 8 |
Figure 1: RJ-45 PINOUT
Table 2: Wiring between Connector One and Two of the Cable
Signal Pairs | PINs on | PINs on Connector | Signal Pairs |
| Connector One | Two |
|
TX_D1+ | 1 | 3 | RX_D2+ |
TX_D1- | 2 | 6 | RX_D2- |
RX_D2+ | 3 | 1 | TX_D1+ |
RX_D2- | 6 | 2 | TX_D1- |
BI_D3+ | 4 | 7 | BI_D4+ |
BI_D3- | 5 | 8 | BI_D4- |
BI_D4+ | 7 | 4 | BI_D3+ |
BI_D4- | 8 | 5 | BI_D3- |
P/N: 2900 - 9999993 | A1 |
