Kramer Electronics user manual Connecting the KDS-MP1

4 Connecting the KDS-MP1

!

Always switch off the power to each device before connecting it to your KDS-MP1. After connecting your KDS-MP1, connect its power and then switch on the power to each device.

To connect the KDS-MP1, as illustrated in the example in Figure 2, do the following:

1.Connect the acceptor to one of the following outputs. The:

HDMI connector to an HDMI acceptor (for example, an LCD display)

VGA 15-pin HD connector to a VGA acceptor (for example, a VGA display)

A/V 3.5mm mini jack to an analog A/V acceptor (for example, a composite video display with audio)

2.Connect the Ethernet RJ-45 connector to the Network via CAT 5 cable.

3.If required, connect a USB memory stick to the USB connector (see Sections 7.2.2 and 8).

4.Connect the power adapter to the 12V DC socket on the KDS-MP1and to the mains electricity (not shown in Figure 2).

8 KDS-MP1 - Connecting the KDS-MP1