4.Wait until the files are copied and then disconnect the USB memory stick.

5.Turn On the power on the display that is connected to the output of the KDS-MP1Digital Media Player.

6.Connect the USB keyboard to the USB port on the KDS-MP1Digital Media

Player.

The KDS-MP1Media Player will boot up into the configuration mode.

7.Go to the firmware update menu (see Section 5.2) and follow the instructions on the display.

8.When prompted, connect the memory stick to the USB port on the

KDS-MP1.

The firmware update process starts immediately and the progress bar on the display shows the status.

!

i

Do not remove the memory stick or turn the power Off before update is complete.

Upon completion of the update, the KDS-MP1restarts automatically and starts playback.

9. Remove the memory stick.

KDS-MP1 - Firmware Update

45

 

 

Page 49
Image 49
Kramer Electronics KDS-MP1 user manual