DVD Standard

Instructions for Use

v 01.1

CONTACT

Krell Industries, Inc.

INFORMATION

45 Connair Road

 

Orange, CT 06477-3650 USA

 

TEL 203-799-9954

 

FAX 203-891-2028

 

E-MAIL krell@krellonline.com

 

WEB SITE http://www.krellonline.com

 

This product complies with the EMC directive (89/336/EEC) and the low-voltage

 

directive (73/23/EEC).

WARNINGS

Do not place the DVD Standard where it could be exposed to dripping or splashing.

 

Do not remove or bypass the ground pin on the end of the AC cord. This may cause

 

radio frequency interference (RFI) to be introduced into your playback system.

 

The ventilation grids on the top and bottom of the DVD Standard must be unob-

 

structed at all times during operation. Do not place flammable material on top of or

 

beneath the component.

 

Turn off all systems’ power before connecting the DVD Standard to any component.

 

Make sure all cable terminations are of the highest quality, free from frayed ends,

 

short circuits, or cold solder joints.

 

Caution: Visible and invisible laser radiation. When the cover is open, avoid expo-

 

sure to beam.

 

This unit employs a laser. To prevent possible eye injury, only a qualified service per-

 

son should remove the cover or attempt to service this device. Use of controls or

 

adjustments or performance of procedures other than those specified herein may

 

result in hazardous radiation exposure.

 

THERE ARE NO USER-SERVICEABLE PARTS INSIDE ANY KRELL PRODUCT.

 

Please contact your authorized dealer, distributor, or Krell if you have any questions

 

not addressed in this reference manual.

 

This product incorporates copyright protection technology that is protected by method claims of certain U.S.

 

patents and other property rights owned by Macrovision Corporation and other rights owners. Use of this

 

copyright protection technology must be authorized by Macrovision Corporation, and is intended for home

 

and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engi-

 

neering or disassembly is prohibited.

 

This product is manufactured in the United States of America. Krell® is a registered trademark of Krell

 

Industries, Inc., and is restricted for use by Krell Industries, Inc., its subsidiaries, and authorized agents.

 

"DTS" and "DTS Digital Out" are registered trademarks of Digital Theater Systems, Inc. Manufactured under

 

license from Dolby Laboratories. "Dolby," and the double-D symbol are trademarks of Dolby Laboratories.

 

“DCDi” is a trademark of Faroudja, a division of Sage, Inc. All other trademarks and tradenames are regis-

 

tered to their respective companies.

© 2001 by Krell Industries, Inc. All rights reserved

P/N 305659

Page 2
Image 2
Krell Industries DVD Standard manual Contact, Information