Krell Industries DVD Standard manual 36 12 VDC Out, IEC Connector

Back Panel Description, continued

BACK PANEL

REMOTE CONNECTIONS,

continued

Notes

36 12 VDC Out and In

The 12 VDC output sends a 12 Volt power on/off signal to other Krell components via a 12 V cable, as well as to other devices that incor- porate a 12 V power on/off trigger input. The 12 VDC input receives 12 Volt power on/off signals from other Krell components and devices that incorporate a 12 V trigger. The 12 VDC out and in connections let you control the operational and stand-by modes of components with 12 V triggers allowing whole systems or parts of systems to be easily coordinated.

When the DVD Standard is in the operational mode, 12 VDC output provides 12 V of DC output. When the DVD Standard is in the stand-by mode or off, DC output is 0 V.

12 VDC Out (12 V trigger) current is limited to 30 mA.

Consult the owner’s manual of each component used in a custom installa- tion to take full advantage of the DVD Standard’s remote capability.

POWER	37 IEC Connector
	The DVD Standard is equipped with a standard female IEC power
	connector, for use with the AC power cord.

18 Krell DVD Standard