Krell Industries KPS 25s manual KPS25s, NOTE:Both ba/anced and single-ended

SECTION1 SECTION2 SECTION3 SECTION4

KPS25s

DIRECTAGCESSCONTROLLER

SECTION7SECTION6SECTION5

2 SPDIFco-axial digital outputs(via RCAconnectors)

1 AES/EBUdigital output (via an XLR connector)

KrelP recommendsthe use of balanced interconnects.Balancedinterconnectsnot onlyhavethe ability to minimizesonicloss but also haveimmunityto inducednoise, especiallyfor installationsusinglongcable lengths. Balancedconnectionshave6dB moregain than single-endedconnections. Whenlevel matchingis critical, keepthis specificationin mind.

The XLR pin configuration is described below:

Pin1 Ground °)

Pin 2 Non-inverting(0

Pin 3 Inverting(180") Theleft and right channelRCAand bal- anced outputs are labeled on the back panel.Pleasemaintainthe correct left/right orientation.

NOTE:Both ba/anced and single-ended

outputscanbe usedto simultaneouslyfeed different systems.

Whenthe KPS25s is connecteddirectly to a stereopoweramplifier or a pair of monau- ral poweramplifiers,usethe variableoutput terminals to insure proper level control.

®

Page10 of 20 EngllshKRELL KPS 25a