Krell Industries KPS 25s manual Connectingthe KPS25s to Your System

Connectingthe KPS25s to Your System

WARNING

Whenmakingconnections to this compo- nent or any other, makesure the power amplifier is Off. Makesureall cabletermi- nationsareof the highestquality, free from frayedends,shorts,or coldsolderjoints.

1.Connect the outputs of associated sourceequipmentto the inputs of the KPS25s.

2.Connectthe left andright outputsof the

THE KPS 25s BACKPANEL

KPS25s to the appropriate associated equipment.

3.Whenconnecting the KPS25s to AC power,first connectthe EICStandard 15 amp AC power cord between the KPS-25sand the wall socket. Then switch the power on from the Rear

Panel PowerSwitch. The word KRELL will momentarilyappearin the Menu Display Windowlocated on the dght front panelof the KPS25s. This indi-

cates that the KPS25shasinitialized andis readyfor operation.Theunit is in Stand-bymode.

1	Left and right	balanced Inputs	11 Variablelevel single-ended
2	Inputs from tape deck			outputs
			12	KrelPCASTTM outputs (vari-
3	Outputs to tape deck
				able level outputsfor usewith
4 Single-ended input 1
				other KrelP CASTTM equipped
5	SinglHnded Input 2
				components)
6	Single-ended input 3		13	BAJfiber optic digital outputs
7	Acrylic Coverdamperadjust-		14	(via TosLinkTM connectors)
	mentcorrtrol			SPDIFco-axial digital outputs
8 Rxedlevel balanced outputs				(via RCAconnectors)
9 Variable level		balanced	15	AES/EBUdigital output (via an
				XLRconnector)
	outputs
			16	BAJfiber optic digital inputs
10	Fixedlevel single-ended
				(via TosLinkTM connectors)
	outputs

17SPDIFco-axial digital Inputs (via RCAconnectors)

18AES/EBUdigital input (via an XLRconnector)

19Main on/off powerswitch

20Fuseholder

21IEC Standard 15 ampAC powercord receptacle

22KrelP RemoteLinkTM commu- nications output data pert

23KrelP RemotaLlnkTM commu- nicatlons input dataport

24RC-5basebandInput

2512Volt trigger output

1 2 3 7 8

1 4 5 6 10 11

Page8 of 20 English® KRELL KPS25s