![](/images/new-backgrounds/1148801/14880119x1.webp)
IGETTING STARTED
TO SETUP YOUR KROWN 200
Place your Krown 200 near your telephone. The power unit is connected to a regular power outlet and the Memory Printer is used with your telephone.
•Be sure that the ON/OFF switch on the TDD is OFF.
•Plug small end of adapter cord into small hole at back of TDD.
•Plug AC Adapter/Charger into an electrical
•Keep both ends plugged in even when machine is not being used for a telephone call.
Plug one end of your modular into the telephone wall jack. Plug the other end into either jack on the back of your TDD. The second jack can be used to connect your telephone set or signaling device to the TDD.
THE LIGHTS AND SWITCHES
GETTING STARTED (CONT.)
Phone Light | Shows sounds heard on the telephone line. |
Power Light | Show status of power. When the light shows: |
| STEADY = Power is ON |
| FLASHING = Low battery power |
| NO LIGHT = Power is OFF |
Power Switch: | This switch turns the power ON and OFF |
Print Switch: | This switch turns the printer ON and OFF. |
8